No announcement yet.

Ported Head and Stroker Crank (2.6L) for S14!

  • Filter
  • Time
  • Show
Clear All
new posts

  • Ported Head and Stroker Crank (2.6L) for S14!

    90mm Stroker Crank ($2100): Stock crank was stroked to 90mm, lightened (knife edged), Ni coated, and balanced. Used with stock length rods and a 95mm bored block will result in ~ 2.6L displacement.

    Ported and Built Head ($2300): CNC ported to ~29.5mm on the intake side and hand finished. 3 angle valve job, brand new Supertech valves, springs, and Ti retainers. Head was previously repaired in one combustion chamber as shown in pictures, but has been signed off on by two different engine builders.

    Located in Boulder, CO. Prefer local pick-up, but will ship at buyer's expense.