Announcement

Collapse
No announcement yet.

FS: parting motor / trans / more

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • FS: parting motor / trans / more

    OK, here is my list. Sorry for the delay, but I had to entertain some folks before I could post it.
    This isnít an auction per se, but it is first pay-first serve. If you want something, you have to send me an email at [email protected] and indicate what parts you want. I wonít be tracking my listing or my private messages, only my email, so please donít send me a message on S14.net. I will answer emails one at a time starting with the first one I receive and offer the item to that person, if I receive payment from the first to show interest then the rest are out of luck. If the first waffles, then Iíll move on to the next in line and so on and so forth.
    All prices exclude shipping, handling, insurance, crates, pallets, etc. I prefer to ship either UPS or UPSP priority. I will insure any item for any amount, but only if you request it and pay the additional amount. If the items arenít insured and itís lost or damaged, itís on you. I prefer payments to be made through PayPal ([email protected]) but I will also accept checks and money orders. Checks have to clear before the items are shipped, so allow 10 days for that process. I will attempt to get the item shipped immediately after the payments for both the item and shipping have been received. Since I wonít have the shipping amount until after the item is sold, packaged and weighed, I will need two payments. The first payment is for the item which allows you to make claim to it (since I am committing to sell to the first received item payment, not the first guy to say he is interested). The second payment will cover the shipping and that is to be received as soon as possible following the shipping quote Iíll send to you.
    Now, Iím just one guy, I donít have an order processing department or a shipping/ receiving department, so allow me some time to process the orders. I will try to get through them as quickly as possible.
    Keep in mind that you are purchasing used car parts. I will not warranty them. You buy at your own risk. I am not out to rip anyone off or take advantage of anyone, but sometimes my perception of something may be different than yours. Try to be reasonable. I will describe the items to the best of my ability. I can provide you as many photos as you need to feel confident, but that all takes time and if the next guy in line doesnít need pictures to close the deal, then youíre out of luck. Iím not trying to be a jackass, but Iíve been played this game before and I know what to expect.
    Another thoughtÖ the prices listed are my asking prices. If you feel they are out of line, I will consider offers, but I donít need you to bust my balls on how you can get such and such from so and so for half the money. If thatís the case, great, buy it there or make me an offer. Who knows, I might just take you up on it, but I will only consider offers after I get though everyone who is interested in the item, so I may not accept your offer immediately.
    I hope you can tell from my little diatribe, Iím a straight shooter. Iíve sold stuff here and on eBay before and I have a lot of positive feedback because I donít play games, so please extend me the same courtesy.

    CF air plenum w/ snorkel, red or blue silicone tube, air filter frame/ throttle bracket (photo in gallery) $1199
    Arrow H-beam rods $899
    alternator w/o pulley $100
    underdrive alt pulley $40
    underdrive water pump pulley $125
    slotted cam sprockets(photo in gallery) $350
    Schrick 284 cam(photo in gallery) $450
    Schrick 276 cam(photo in gallery) $450
    Evo 3 2.5l block $1599
    Evo 3 oil squirters $999
    Evo 3 oil pump $175
    evo 2 head w/ +2mm intake +1mm exhaust/ VAC custom springs/ bag of misc valves(photo in gallery) (at least on bent valve in #2, need #2 CC cleaned up, Iíll provide the source for replacement valves- more info available)$2199
    cam tray w/ bearing caps and shim buckets $499
    custom cam carrier front covers $150
    water pipe (steel, from overflow to waterpump) $29
    water return manifold (aluminum- attaches to head) $99
    Cam cover $125
    rear cam box cover plate $49
    upper chain guide $30
    Evo 3 Bosch green top fuel injectors(photo in gallery) $399
    Adj. fuel pressure regulator w/plumbing, brackets, modified rail(photo in gallery) $149
    Evo 2 piece 50/50 headers(photo in gallery) (dent in #2 tube) $699
    misc water hoses and thermostat $50
    6 new Bosch spark plugs XR4CS $20
    Starter $100
    upgraded chain tensioner $75
    48mm throttle bodies (bored out 46mm w/ narrowed shafts) $849
    Group N rear main seal $50
    Almost new timing chain $50
    almost new oil pump chain $10
    ARP main studs $90
    evo flywheel $499
    740 motor mounts $100
    535 trans mounts $50
    87mm crank $599
    lower chain guide (lg) $100
    lower chain guide (sm) $75
    chain guide rail (plastic) $10
    idler sprocket ( 2 available) $20
    motor mounts arm left $50
    motor mount arm right $30
    lower oil pan with baffle $175
    upper oil pan $125
    Engine bowl reinforcement $75
    oil filter housing $200
    Bell housing (welded repair patch) $150
    timing case $100
    crank hub-dampener $275
    used (heat cycled) head bolts $25
    water pump $99
    VAC custom spring seats (new) $75
    guibo (have 2) $25ea
    stock plenum w/o horns $75
    clutch release lever $5
    stock valve springs/retainers/keepers $100
    throwout bearing $20
    5spd OD trans $699
    5spd CR trans $1649
    5spd OD trans (needs rebuild) $200
    16x8 BBS RK w/245-45 Kuhmo Victoracer $499
    E36 M3 brake conversion w/ 3 sets of pads/ rotors/ hats/ calipers $899
    1 qt Accusump w/ oil filter adapter/ electric valve $299
    HD clutch w/ 6 puck solid hub $300






    NASA GTS5 #945
    NASA GTS5 Midwest Regional Champion ('09,'11,'12 & '14)

  • #2
    Hello Jeff,

    everything that we talked about.

    Alex.

    Comment


    • #3
      Jeff,

      Does "Cam cover" mean valve cover? How does the paint look? I am very interested. Could you send me a pic?

      [email protected]

      Thanks
      Joey
      http://JoeysM3.com

      Comment


      • #4
        how can i get in touch with u im interested on the 50/50 headers and more my number is 19085781097 thank you

        Comment


        • #5
          what size is your airbox? 46 and 15mm runners? if it's 48's would it work for 46?
          thankx, Ogi
          :burn:RED DRAGON

          Comment


          • #6
            clmracing - sorry the headers have been sold
            you can reach me by email [email protected]

            ogi///m3 - sorry, i should have specified- 48mm 18cm
            it would work, but not ideal, you'd have to at least rework the transition between the runner and TB to eliminate the lip that would be present.






            NASA GTS5 #945
            NASA GTS5 Midwest Regional Champion ('09,'11,'12 & '14)

            Comment


            • #7
              PM'd and e-mailed you on the CR tranny.
              Last edited by Nikos; 08-16-2007, 05:58 AM.

              Comment


              • #8
                Email sent
                -Tony-
                1991 M3 10Km
                1989 M3
                BEGINS HERE


                Comment


                • #9
                  PM sent on the wheels
                  "Racing is like life, what happens before or after is just waiting." - Steve McQueen (Le Mans)

                  Comment


                  • #10
                    Who makes the FPR (fuel pressure regulator)? Does it have a pressure gauge?
                    FYI, I couldn't find a photo in the gallery.

                    Comment


                    • #11
                      updated list/ prices what's sold/available

                      CF air plenum w/ snorkel, red or blue silicone tube, air filter frame/ throttle bracket 48mm- 18cm (photo in gallery) $1100
                      Arrow H-beam rods $899
                      alternator w/o pulley $100
                      underdrive alt pulley $40
                      Schrick 276 cam(photo in gallery) $400
                      Evo 3 2.5l block $1499
                      Evo 3 oil squirters $899
                      evo 2 head w/ +2mm intake +1mm exhaust/ VAC custom springs/ bag of misc valves(photo in gallery) (at least on bent valve in #2, need #2 CC cleaned up, Iíll provide the source for replacement valves- more info available) $2199
                      cam tray w/ bearing caps and shim buckets $499
                      custom cam carrier front covers $150
                      water return manifold (aluminum- attaches to head) $99
                      Cam cover (painted purple) $125
                      upper chain guide $30
                      Evo 3 Bosch green top fuel injectors(photo in gallery) $399
                      misc water hoses and thermostat $50
                      6 new Bosch spark plugs XR4CS $20
                      Starter $100
                      upgraded chain tensioner $75
                      Group N rear main seal $50
                      Almost new timing chain $50
                      almost new oil pump chain $10
                      ARP main studs $90
                      evo flywheel $449
                      740 motor mounts $100
                      535 trans mounts $50
                      87mm crank $549
                      lower chain guide (lg) $100
                      lower chain guide (sm) $75
                      chain guide rail (plastic) $10
                      idler sprocket ( 2 available) $20 ea
                      motor mounts arm left $50
                      motor mount arm right $30
                      upper oil pan $125
                      Bell housing (welded repair patch) $150
                      timing case $100
                      crank hub-dampener $275
                      used (heat cycled) head bolts $25
                      water pump $99
                      guibo (have 2) $25ea
                      stock plenum w/o horns (painted purple) $75
                      clutch release lever $5
                      stock valve springs/retainers/keepers $100
                      throwout bearing $20
                      5spd OD trans $599
                      5spd CR trans $1509
                      5spd OD trans (needs rebuild) $199
                      16x8 BBS RK w/245-45 Kuhmo Victoracer (painted black - track wheels) $499
                      E36 M3 front brake conversion w/ 2 new sets of Hawk blues/ rotors/ hats/ calipers $899
                      1 qt Accusump w/ oil filter adapter/ electric valve $299
                      HD clutch w/ 6 puck solid hub $300

                      sold/ pending

                      underdrive water pump pulley
                      slotted cam sprockets - pending
                      Schrick 284 cam - pending
                      VAC custom spring seats (new)
                      lower oil pan with baffle
                      Engine bowl reinforcement
                      oil filter housing
                      48mm throttle bodies (bored out 46mm w/ narrowed shafts)
                      Adj. fuel pressure regulator w/plumbing, brackets, modified rail(photo in gallery)
                      Evo 2 piece 50/50 headers
                      water pipe (steel, from overflow to waterpump)
                      Evo 3 oil pump
                      rear cam box cover plate






                      NASA GTS5 #945
                      NASA GTS5 Midwest Regional Champion ('09,'11,'12 & '14)

                      Comment


                      • #12
                        updated list/ prices what's sold/available

                        E36 M3 front brake conversion w/ 2 new sets of Hawk blues/ rotors/ hats/ calipers $899
                        Arrow H-beam rods $849
                        5spd OD trans $599
                        5spd CR trans $1500
                        5spd OD trans (needs rebuild) $199
                        Schrick 276 cam(photo in gallery) $400
                        Evo 3 2.5l block $1499
                        Evo 3 oil squirters $899
                        evo 2 head w/ +2mm intake +1mm exhaust/ VAC custom springs/ bag of misc valves(photo in gallery) (at least on bent valve in #2, need #2 CC cleaned up, Iíll provide the source for replacement valves- more info available) $2199
                        cam tray w/ bearing caps and shim buckets $499
                        Cam cover (painted purple) $125
                        upper chain guide $30
                        Starter $100
                        Group N rear main seal $50
                        Almost new timing chain $50
                        almost new oil pump chain $10
                        ARP main studs $90
                        evo flywheel $449
                        740 motor mounts $100
                        535 trans mounts $50
                        87mm crank $549
                        lower chain guide (lg) $100
                        lower chain guide (sm) $75
                        chain guide rail (plastic) $10
                        idler sprocket ( 2 available) $20 ea
                        upper oil pan $125
                        Bell housing (welded repair patch) $150
                        timing case $100
                        crank hub-dampener $275
                        used (heat cycled) head bolts $25
                        water pump $99
                        guibo (have 2) $25ea
                        stock plenum w/o horns (painted purple) $75
                        clutch release lever $5
                        stock valve springs/retainers/keepers $100
                        throwout bearing $20
                        16x8 BBS RK w/245-45 Kuhmo Victoracer (painted black - track wheels) $499
                        VAC custom valve spring seats (new) $50
                        new main bearings (M10) $50
                        new rod bearings (M10) $50
                        coil $20
                        dipstick/tube $10
                        handbrake lever $10
                        oil separator $10
                        stock intake rubber elbow $10
                        fan/ fan clutch $25
                        crank sprocket $50



                        sold/ pending

                        6 new Bosch spark plugs XR4CS
                        alternator w/o pulley
                        underdrive alt pulley
                        custom cam carrier front covers
                        water return manifold (aluminum- attaches to head)
                        Evo 3 Bosch green top fuel injectors
                        misc water hoses and thermostat
                        upgraded chain tensioner
                        motor mounts arm left
                        motor mount arm right
                        CF air plenum w/ snorkel, red or blue silicone tube, air filter frame/ throttle bracket 48mm- 18cm
                        1 qt Accusump w/ oil filter adapter/ electric valve
                        HD clutch w/ 6 puck solid hub
                        underdrive water pump pulley
                        lower oil pan with baffle
                        Engine bowl reinforcement
                        oil filter housing
                        48mm throttle bodies
                        Adj. fuel pressure regulator w/plumbing, brackets, modified rail
                        Evo 2 piece 50/50 headers
                        water pipe (steel, from overflow to waterpump)
                        Evo 3 oil pump
                        rear cam box cover plate
                        slotted cam sprockets - pending
                        Schrick 284 cam - pending






                        NASA GTS5 #945
                        NASA GTS5 Midwest Regional Champion ('09,'11,'12 & '14)

                        Comment


                        • #13
                          updated list/ revised pricing

                          E36 M3 front brake conversion w/ 2 new sets of Hawk blues/ rotors/ hats/ calipers $899
                          Arrow H-beam rods $849
                          5spd OD trans $599
                          5spd CR trans $1500
                          5spd OD trans (needs rebuild) $199
                          Schrick 276 cam(photo in gallery) $400
                          slotted cam sprockets - $325
                          Schrick 284 cam
                          Evo 3 2.5l block $1499
                          Evo 3 oil squirters $899
                          evo 2 head w/ +2mm intake +1mm exhaust/ VAC custom springs/ bag of misc valves(photo in gallery) (at least on bent valve in #2, need #2 CC cleaned up, Iíll provide the source for replacement valves- more info available) $2199
                          cam tray w/ bearing caps and shim buckets $499
                          Cam cover (painted purple) $125
                          upper chain guide $30
                          Starter $100
                          Group N rear main seal $50
                          Almost new timing chain $50
                          almost new oil pump chain $10
                          ARP main studs $90
                          evo 12lb flywheel $325
                          740 motor mounts $100
                          535 trans mounts $50
                          87mm crank $529
                          lower chain guide (lg) $100
                          lower chain guide (sm) $75
                          chain guide rail (plastic) $10
                          idler sprocket (2 available) $20 ea
                          upper oil pan $125
                          Bell housing (welded repair patch) $150
                          timing case $100
                          crank hub-dampener $275
                          seasoned head bolts $25
                          water pump $99
                          guibo (have 2) $25ea
                          stock plenum w/o horns (painted purple) $75
                          clutch release lever $5
                          stock valve springs/retainers/keepers $100
                          throwout bearing $20
                          16x8 BBS RK w/245-45 Kuhmo Victoracer (painted black - track wheels) $499
                          VAC custom valve spring seats (new) $50
                          new main bearings (M10) $50
                          new rod bearings (M10) $50
                          coil $20
                          dipstick/tube $10
                          handbrake lever $10
                          oil separator $10
                          stock intake rubber elbow $10
                          fan/ fan clutch $25
                          crank sprocket $50
                          power window regulator and motors (both sides available) $199 ea


                          sold/ pending

                          6 new Bosch spark plugs XR4CS
                          alternator w/o pulley
                          underdrive alt pulley
                          custom cam carrier front covers
                          water return manifold (aluminum- attaches to head)
                          Evo 3 Bosch green top fuel injectors
                          misc water hoses and thermostat
                          upgraded chain tensioner
                          motor mounts arm left
                          motor mount arm right
                          CF air plenum w/ snorkel, red or blue silicone tube, air filter frame/ throttle bracket 48mm- 18cm
                          1 qt Accusump w/ oil filter adapter/ electric valve
                          HD clutch w/ 6 puck solid hub
                          underdrive water pump pulley
                          lower oil pan with baffle
                          Engine bowl reinforcement
                          oil filter housing
                          48mm throttle bodies
                          Adj. fuel pressure regulator w/plumbing, brackets, modified rail
                          Evo 2 piece 50/50 headers
                          water pipe (steel, from overflow to waterpump)
                          Evo 3 oil pump
                          rear cam box cover plate
                          Schrick 284 cam






                          NASA GTS5 #945
                          NASA GTS5 Midwest Regional Champion ('09,'11,'12 & '14)

                          Comment


                          • #14
                            Re: e36 m3 disc conversion kit - would you sell the kit minus calipers? I already have a set. Also, what implications does this have on the existing setup (ie change in offset value)?

                            Kind Regards,

                            adil

                            Comment


                            • #15
                              If shipping doesn't kill me, I would be very interested in the evo block and squirters. How much would be to Montreal, Canada, H1P1J9.

                              Thanks

                              Motulman aka Drevaen

                              Comment

                              Working...
                              X