Announcement

Collapse
No announcement yet.

<FS> motor parts and more

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • <FS> motor parts and more

    I'm resurrecting one of my old lists. This list and these prices supersede any prior posts. All pricing negotiable and I offer quantity discounts. Shipping is not included unless otherwise stated.
    All parts are in good, used condition unless otherwise described.

    E36 M3 front brake conversion w/ 2 new and 1 used set of Hawk blues/ rotors/ hats/ calipers. Calipers include brass bushing upgrade. $829
    OEM rear brake calipers upgraded with Korman SS pistons and brass bushings. Will include stock rotors and used Hawk Blue pads. $199
    5spd OD trans $499
    5spd OD trans (needs rebuild) $199

    Euro 215 head w/ +2mm intake +1mm exhaust Supertech valves/ VAC custom 12k RPM springs/ bag of misc valves(photo in gallery) (I suspect at least one bent exhaust valve in #2 combustion chamber $2100 as is or...
    >option 1: I'll completely refurbish the head for you for whatever the parts and labor are plus the head price listed above, this will save you the hassle and you'll get a head ready to bolt on the car
    >option 2: I'll separate the valve springs if interested - $400 discount from above price
    >option 3: I'll install OEM springs - $300 discount from above price
    head price listed above

    upper chain guide $25
    Starter $99
    Almost new timing chain $50
    almost new oil pump chain $10
    740 motor mounts + 535 trans mounts $99
    lower chain guide (lg about 100k miles) $69
    lower chain guide (sm about 100k miles) $39
    chain guide rail (plastic about 100k miles) $10
    timing chain idler sprocket (2 available) $20 ea
    Bell housing (welded repair patch) $149
    timing case $99
    crank hub-dampener $175
    guibo (have 2) $25ea
    clutch release lever $5
    stock valve springs/retainers/keepers $99
    throwout bearing $20
    16x8 BBS RK w/245-45 Kuhmo Victoracer (painted black - track wheels) $499
    VAC custom valve spring seats (new) $50
    new main bearings (M10) $50
    new rod bearings (M10) $50
    coil $20
    dipstick/tube $10
    handbrake lever $10
    oil separator $10
    stock intake rubber elbow $10
    fan w/o clutch $15
    crank sprocket $50
    power window regulator and motors (both sides available) $199 ea
    trunk carpet and side/ back/ front trim panels $100
    trunk springs - make offer
    trunk hinges - make offer
    all seatbelts - make offer
    airbag wheel in perfect condition - make offer
    knee bolster from airbag car - make offer
    trans crossmember $39
    rear fiberglass bumper insert $99

    Jeff
    [email protected]






    NASA GTS5 #945
    NASA GTS5 Midwest Regional Champion ('09,'11,'12 & '14)

  • #2
    I'm resurrecting one of my old lists. This list and these prices supersede any prior posts. All pricing negotiable and I offer quantity discounts. Shipping is not included unless otherwise stated.
    All parts are in good, used condition unless otherwise described.

    Ground Control spherical front control arm bushings in lollypop bracket $150
    New wheel studs - 60mm overall qty 20 -$25
    TPS $10
    brake booster - $50
    stock fuel rail - $25
    E36 M3 front brake conversion w/ 2 new and 1 used set of Hawk blues/ rotors/ hats/ calipers. Calipers include brass bushing upgrade. $829

    OEM rear brake calipers upgraded with Korman SS pistons and brass bushings. Will include stock rotors and used Hawk Blue pads. $199

    5spd OD trans $499
    5spd OD trans (needs rebuild) $199

    Euro 215 head w/ +2mm intake +1mm exhaust Supertech valves/ VAC custom 12k RPM springs/ bag of misc valves(photo in gallery) (I suspect at least one bent exhaust valve in #2 combustion chamber $2100 as is or...
    >option 1: I'll completely refurbish the head for you for whatever the parts and labor are plus the head price listed above, this will save you the hassle and you'll get a head ready to bolt on the car
    >option 2: I'll separate the valve springs if interested - $400 discount from above price
    >option 3: I'll install OEM springs - $300 discount from above price
    head price listed above

    upper chain guide $25
    Almost new timing chain $50
    almost new oil pump chain $10
    740 motor mounts + 535 trans mounts $99
    lower chain guide (lg about 100k miles) $69
    lower chain guide (sm about 100k miles) $39
    chain guide rail (plastic about 100k miles) $10
    timing chain idler sprocket (2 available) $20 ea
    Bell housing (welded repair patch) $149
    crank hub-dampener $175
    guibo (have 2) $25ea
    clutch release lever $5
    stock valve springs/retainers/keepers $99
    throwout bearing $20
    16x8 BBS RK w/245-45 Kuhmo Victoracer (painted black - track wheels) $499
    VAC custom valve spring seats (new) $50
    new main bearings (M10) $50
    new rod bearings (M10) $50
    coil $20
    dipstick/tube $10
    handbrake lever $10
    stock intake rubber elbow $10
    fan w/o clutch $15
    crank sprocket $50
    power window regulator and motors (both sides available) $199 ea
    trunk carpet and side/ back/ front trim panels $100
    trunk springs - make offer
    trunk hinges - make offer
    all seatbelts - make offer
    airbag wheel in perfect condition - make offer
    knee bolster from airbag car - make offer
    trans crossmember $39
    rear fiberglass bumper insert $99
    distributor housing/ ex cam cover plate - $50

    /////////////////////////////////////////////////////////////////////////////

    Starter - sold
    oil separator - sold
    timing case - sold

    Jeff
    [email protected]
    Reply With Quote
















    NASA GTS5 #945
    NASA GTS5 Midwest Regional Champion ('09,'11,'12 & '14)

    Comment


    • #3
      Jeff,
      What wheel arrangement were the studs for? I would take them if they are suitable for 18mm spacer and wheel.
      Cheers,
      John
      88M3 henna


      73T100C
      97 540\6-Gone
      2008 MINI Clubman S

      Comment


      • #4
        John,
        I don't think they'll work for you.
        I use 15mm spacers and they are too short.
        Jeff






        NASA GTS5 #945
        NASA GTS5 Midwest Regional Champion ('09,'11,'12 & '14)

        Comment


        • #5
          Thanks for clarifying Jeff!
          John
          88M3 henna


          73T100C
          97 540\6-Gone
          2008 MINI Clubman S

          Comment


          • #6
            Jeff,
            Do you have the nuts to go with those studs? If so I'm interested, but I need to figure out if they would work with my 2 wheel setups:

            1) stock wheels (would center caps fit over the studs?)
            2) SSR Comps with 10mm spacers

            I'll try to take some measurements so I can figure out the answers.

            Thanks!
            Dominic

            Comment


            • #7
              pics of the RK's to [email protected]
              thanks
              Matt

              Comment


              • #8
                i'll take the studs if they come with nutz and the GC CABs too. i can paypal you asap

                Karl Kraus --Education is a crutch with which the foolish attack the wise to prove that
                they are not idiots.

                Comment


                • #9
                  Are the guibo's new?

                  88 M3 - LACHSSILBER/M TECH
                  89 M3 - ALPINEWEISS II/SCHWARZ
                  85 323I S52 - ALPINEWEISS/SCHWARZ
                  91 M TECHNIC TURBO - MACAOBLAU/M TECH


                  Comment


                  • #10
                    Reelizmpro
                    Are the guibo's new?

                    >> No, they are used, but in fine condition, no tears or dry rot.

                    Eric
                    I'll take the studs if they come with nutz and the GC CABs too. i can paypal you asap

                    >> They don't include nuts. everything is first pay first own. contact me via email for additional information or to work out shipping

                    88M3ofDoom
                    pics of the RK's to [email protected]

                    >> links to pictures sent

                    Dominic
                    Do you have the nuts to go with those studs? If so I'm interested, but I need to figure out if they would work with my 2 wheel setups:

                    1) stock wheels (would center caps fit over the studs?)
                    2) SSR Comps with 10mm spacers

                    >> Nuts not included, will probably work with stock wheels, but I have no way to check for you. I can provide other photos with clearer image of ruler which could help you determine if they'll work for you.


                    Thanks
                    Jeff






                    NASA GTS5 #945
                    NASA GTS5 Midwest Regional Champion ('09,'11,'12 & '14)

                    Comment


                    • #11
                      I'm resurrecting one of my old lists. This list and these prices supersede any prior posts. All pricing negotiable and I offer quantity discounts. Shipping is not included unless otherwise stated.
                      All parts are in good, used condition unless otherwise described.

                      coolant expansion tank - very good condition (white plastic) - $25
                      ICV -fully functional -$100
                      alternator bracket (12311284306) - $20
                      Ground Control spherical front control arm bushings in lollypop bracket $150
                      New wheel studs - 60mm overall qty 20 -$25
                      TPS $10
                      brake booster - $50
                      stock fuel rail - $25
                      stock FPR - $10
                      E36 M3 front brake conversion w/ 2 new and 1 used set of Hawk blues/ rotors/ hats/ calipers. Calipers include brass bushing upgrade. $829

                      OEM rear brake calipers upgraded with Korman SS pistons and brass bushings. Will include stock rotors and used Hawk Blue pads. $199

                      5spd OD trans $499
                      5spd OD trans (needs rebuild) $199

                      Euro 215 head w/ +2mm intake +1mm exhaust Supertech valves/ VAC custom 12k RPM springs/ bag of misc valves(photo in gallery) (I suspect at least one bent exhaust valve in #2 combustion chamber $2100 as is or...
                      >option 1: I'll completely refurbish the head for you for whatever the parts and labor are plus the head price listed above, this will save you the hassle and you'll get a head ready to bolt on the car
                      >option 2: I'll separate the valve springs if interested - $400 discount from above price
                      >option 3: I'll install OEM springs - $300 discount from above price
                      head price listed above

                      upper chain guide $25
                      Almost new timing chain $50
                      almost new oil pump chain $10

                      lower chain guide (lg about 100k miles) $69
                      lower chain guide (sm about 100k miles) $39
                      chain guide rail (plastic about 100k miles) $10
                      timing chain idler sprocket (2 available) $20 ea
                      Bell housing (welded repair patch) $149
                      crank hub-dampener $175
                      guibo (have 2) $25ea
                      clutch release lever $5
                      stock valve springs/retainers/keepers $99
                      throwout bearing $20
                      16x8 BBS RK w/245-45 Kuhmo Victoracer (painted black - track wheels) $499
                      VAC custom valve spring seats (new) $50
                      new main bearings (M10) $50
                      new rod bearings (M10) $50
                      coil $20
                      dipstick/tube $10
                      handbrake lever $10
                      stock intake rubber elbow $10
                      fan w/o clutch $15
                      crank sprocket $50
                      power window regulator and motors (both sides available) $199 ea
                      trunk carpet and side/ back/ front trim panels $100
                      trunk springs - make offer
                      trunk hinges - make offer
                      all seatbelts - make offer
                      airbag wheel in perfect condition - make offer
                      knee bolster from airbag car - make offer
                      trans crossmember $39
                      rear fiberglass bumper insert $99
                      distributor housing/ ex cam cover plate - $50

                      /////////////////////////////////////////////////////////////////////////////

                      740 motor mounts + 535 trans mounts - sold
                      Starter - sold
                      oil separator - sold
                      timing case - sold

                      Jeff
                      [email protected]






                      NASA GTS5 #945
                      NASA GTS5 Midwest Regional Champion ('09,'11,'12 & '14)

                      Comment


                      • #12
                        Is the alternator bracket new?
                        -AJ

                        -'88 Henna Red-

                        Comment


                        • #13
                          nope, everything is used unless otherwise stated.
                          Jeff






                          NASA GTS5 #945
                          NASA GTS5 Midwest Regional Champion ('09,'11,'12 & '14)

                          Comment


                          • #14
                            updated list

                            Air vents from outside dash locations - $15 pr
                            4.10 Differential w/101k miles, I swapped my MCoupe cover to another diff, so a new gasket will be needed. I will provide the new gasket uninstalled, so you can inspect everything before it goes together. - $350
                            coolant expansion tank - very good condition (white plastic) - $25
                            ICV -fully functional -$100
                            alternator bracket (12311284306) - $20
                            new wheel studs - 60mm overall qty 20 -$25
                            TPS $10
                            brake booster - $50
                            stock fuel rail - $25
                            stock FPR - $10
                            E36 M3 front brake conversion w/ 2 new and 1 used set of Hawk blues/
                            rotors/ hats/ calipers. Calipers include brass bushing upgrade. $829

                            OEM rear brake calipers upgraded with Korman SS pistons and brass bushings. Will include stock rotors and used Hawk Blue pads. $199
                            5spd OD trans (needs rebuild) $199
                            Euro 215 head w/ +2mm intake +1mm exhaust Supertech valves/ VAC custom 12k RPM springs/ bag of misc valves (I suspect at least one bent exhaust valve in #2 combustion chamber) $2100 as is or...
                            >option 1: I'll completely refurbish the head for you for whatever the parts and labor are plus the head price listed above, this will save you the hassle and you'll get a head ready to bolt on the car
                            >option 2: I'll separate the valve springs if interested - $400 discount from above price
                            >option 3: I'll install OEM springs - $300 discount from above price
                            head price listed above

                            upper chain guide $25
                            Almost new timing chain $50
                            almost new oil pump chain $10
                            lower chain guide (lg about 100k miles) $69
                            lower chain guide (sm about 100k miles) $39
                            chain guide rail (plastic about 100k miles) $10
                            timing chain idler sprocket (2 available) $20 ea
                            Bell housing (welded repair patch) $149
                            crank hub-dampener $175
                            guibo (have 2) $25ea
                            clutch release lever $5
                            stock valve springs/retainers/keepers $99
                            throwout bearing $20
                            16x8 BBS RK w/245-45 Kuhmo Victoracer (painted black - track wheels) $499
                            VAC custom valve spring seats (new) $50
                            new main bearings (M10) $50
                            new rod bearings (M10) $50
                            coil $20
                            dipstick/tube $10
                            handbrake lever $10
                            stock intake rubber elbow $10
                            fan w/o clutch $15
                            crank sprocket $50
                            power window regulator and motors (both sides available) $199 ea
                            trunk carpet and side/ back/ front trim panels $100
                            trunk springs - make offer
                            trunk hinges - make offer
                            all seatbelts - make offer
                            airbag wheel in perfect condition - make offer
                            knee bolster from airbag car - make offer
                            trans crossmember $39
                            distributor housing/ ex cam cover plate - $50

                            /////////////////////////////////////////////////////////////////////////////

                            rear fiberglass bumper insert - pending
                            Ground Control spherical front control arm bushings in lollypop bracket - pending

                            740 motor mounts + 535 trans mounts - sold
                            Starter - sold
                            oil separator - sold
                            timing case - sold
                            5spd OD trans - sold

                            Jeff
                            [email protected]






                            NASA GTS5 #945
                            NASA GTS5 Midwest Regional Champion ('09,'11,'12 & '14)

                            Comment


                            • #15
                              this list contains many parts that people have been asking for

                              Header flange for custom exhaust (used/ Evo sized) - $40
                              Blue silicone hose for carbon airbox (email for details)- $20
                              Ground Control spherical front control arm bushings in lollypop bracket - $150
                              Air vents from outside dash locations - $15 pr
                              4.10 Differential w/101k miles, I swapped my MCoupe cover to another diff, so a new gasket will be needed. I will provide the new gasket uninstalled, so you can inspect everything before it goes together. - $350
                              coolant expansion tank - very good condition (white plastic) - $25
                              ICV -fully functional -$100
                              alternator bracket (12311284306) - $20
                              new wheel studs - 60mm overall (nuts not included) qty 20 -$25
                              TPS $10
                              brake booster - $50
                              stock fuel rail - $25
                              stock FPR - $10
                              E36 M3 front brake conversion w/ 2 new and 1 used set of Hawk blues/
                              rotors/ hats/ calipers. Calipers include brass bushing upgrade. $829

                              OEM rear brake calipers upgraded with Korman SS pistons and brass bushings. Will include stock rotors and used Hawk Blue pads. $199
                              5spd OD trans (needs rebuild) $199
                              Euro 215 head w/ +2mm intake +1mm exhaust Supertech valves/ VAC custom 12k RPM springs/ bag of misc valves (I suspect at least one bent exhaust valve in #2 combustion chamber) $2100 as is or...
                              >option 1: I'll completely refurbish the head for you for whatever the parts and labor are plus the head price listed above, this will save you the hassle and you'll get a head ready to bolt on the car
                              >option 2: I'll separate the valve springs if interested - $400 discount from above price
                              >option 3: I'll install OEM springs - $300 discount from above price
                              head price listed above

                              upper chain guide $25
                              Almost new timing chain $50
                              almost new oil pump chain $10
                              lower chain guide (lg about 100k miles) $69
                              lower chain guide (sm about 100k miles) $39
                              chain guide rail (plastic about 100k miles) $10
                              timing chain idler sprocket (2 available) $20 ea
                              Bell housing (welded repair patch) $149
                              crank hub-dampener $175
                              guibo (have 2) $25ea
                              clutch release lever $5
                              stock valve springs/retainers/keepers $99
                              throwout bearing $20
                              16x8 BBS RK w/245-45 Kuhmo Victoracer (painted black - track wheels) $489
                              VAC custom valve spring seats (new) $50
                              new main bearings (M10) $50
                              new rod bearings (M10) $50
                              coil $20
                              dipstick/tube $10
                              handbrake lever $10
                              stock intake rubber elbow $10
                              fan w/o clutch $15
                              crank sprocket $49
                              power window regulator and motors (both sides available) $149 ea
                              trunk carpet and side/ back/ front trim panels $99
                              trunk springs - make offer
                              trunk hinges - make offer
                              all seatbelts - make offer
                              airbag wheel in perfect condition - make offer
                              knee bolster from airbag car - make offer
                              trans crossmember $39
                              distributor housing/ ex cam cover plate - $50

                              /////////////////////////////////////////////////////////////////////////////

                              rear fiberglass bumper insert - pending


                              740 motor mounts + 535 trans mounts - sold
                              Starter - sold
                              oil separator - sold
                              timing case - sold
                              5spd OD trans - sold






                              NASA GTS5 #945
                              NASA GTS5 Midwest Regional Champion ('09,'11,'12 & '14)

                              Comment

                              Working...
                              X