FS: Front suspension bits (AST, Massive, THR, TMS)

[iflytii]

Upgrading to AST 5300's using e36 parts so my old e30/M3 specific AST 4200's have gotta go! AST is rebuilding the shocks and upgrading to the latest and greatest internals as I type so they will be fresh and ready to go for the new owner.

What's for sale:

Front e30/m3 AST 4200's, strut tubes modified @AST.

Sway bar mount included
Lower spring perch included (60mm)
"generic" upper spring perch included (They came with the shocks, I used and am keeping Vorshlag camber plates)
Tie rod lever arms included and modified to accommodate bottom adjustment
Turner brake backing plates/ducts are included (no hose, just the backing plates)
OEM quality wheel bearings are included (approximately 2 years old)
Wheel studs included (approximately 2 years old)

(turner bearing dust cap/wheel spacers not included)

(pardon the dirt, pic was taken right after they were removed from car)

Front e30/M3 Massive BBK "install kit". (rotors NOT included)

Front hats included (for Wilwood GT 13" rotors)
Front Caliper adapters included (for Wilwood 6 piston radial mount calipers)
Brand new hardware included courtesy of Massive Brakes!

e30/M3 aluminum control arms

These are approximately 4 years old, never street driven with about 15 track days + 8 +/- auto-x days wear. At least one boot is torn but I'll include the aftermarket urethane boots with sale.

Treehouse racing control arm bushings

Same age as above control arms, bushings have plenty of serviceable life left

Prices:

4200's - $2200 with NO core required.
Massive BBK install kit - $475
Control Arms - $225
Tree house CABS - $95

Shipping:
Free FedEx ground shipping within the continental US
International shipping will be actual cost of shipping.

[M drei 88]

Tree house CABS - $95

I'll take the "Tree house CABS - $95" please.
PM me your paypal info, when you get a chance.

Thanks,
Dan

[BigTurboFan]

PM sent on AST 4200s

[iflytii]

PM's replied to. Sales pending on Shocks and THR Cabs.

[Justin(OKC)]

Bob,

you never emailed me back with a price did you? Bummer. I guess I'll go with the 5200's.

[iflytii]

Justin, I sent you a couple emails that didn't get replied to so I assumed you might not be interested. Check your PM.

[iflytii]

Updated Prices:

4200's - $2200 with NO core required. (sale pending)
Massive BBK install kit - $450
Control Arms - $200
Tree house CABS - $SOLD

[chutrain]

What brand new hardware is included with the Massive BBK?

[Az in Oz]

Tie rod lever arms included and modified to accommodate bottom adjustment

This has me wondering. I am buying the 4200 setup and didn't know this was an issue. Can you enlighten me on the modifications required please?

Cheers

I haven't spoken to Jack about this, it may be a good time....:gotcha:

[iflytii]

Tie rod lever arms included and modified to accommodate bottom adjustment

This has me wondering. I am buying the 4200 setup and didn't know this was an issue. Can you enlighten me on the modifications required please?

Cheers

I haven't spoken to Jack about this, it may be a good time....:gotcha:

It's not really an issue. You just have to drill a hole for the bottom adjustment shaft to poke through so you can mount the knob to it.

[iflytii]

What brand new hardware is included with the Massive BBK?

I don't know but I've asked Lee so hopefully I will have an answer soon.

[LeeVuong]

All the SAE harware is grade 8 Brighton-Best fasteners. 1/4" socket head cap screws and grade C stover nuts (crushed - requiring no Loctite).

Lee

[LeeVuong]

BTW SAE grade 8 is NOT 8.8, it is in between 10.9 and 12.9 DIN. ;-)I have ben using that grade for the past 8 years. Always purchased from the same supplier.

[iflytii]

MASSIVE brake kit dropped to $400!

Awaiting pricing from AST for a pair of rears to offer shocks as a full set. Fronts still available by themselves.

Control arms dropped to $175!

[jimmy p.]

PM sent.