Engine Part Out and other stuff

[Rogue]

Remaining parts:

Engine mounting Brackets left and right - $30
Small Coolant Pipe, needs some cleaning - $35
Flywheel $75
Intake plenum w/ horns $125
Injectors $50
Stock cam Shafts with possibly a offset cam $80
Trunk with damage - best offer
Wheel Jack Kit with cover (does not include Jack) - $35
Rear Block Cover with good seal $25
Korman Oil Pan Baffle - $40
Rear Cam box cover - $50
Power Steering Pump - $75
Alternator - $50.00
Starter - $85

[Rogue]

Flywheel $75
Intake plenum w/ air horns $125
Injectors $50
Distributor Housing $40
Trunk with damage - make offer

[Rogue]

Crank $300 no spun bearings but may need a polish
Flywheel $75
Intake plenum w/ air horns $125
Injectors $50
Stock cam Shafts $100
Coolant rail (large) $45
Connecting Rods with pistons $175
Distributor Housing $40
Trunk with damage - make offer

[Rogue]

Parts remaining:

Crank $300 no spun bearings but may need a polish
Flywheel $75
Intake plenum w/ air horns $125
Injectors $50
Stock cam Shafts $150
Coolant rail (large) $45
Connecting Rods with pistons $250
Distributor Housing $40
Trunk with damage - make offer

more to come

[Rogue]

Yes I can ship to Italy. It may be a pretty penny shipping wise, but I have no problem doing that for you.

[jeff]

Can you ship to Italy? I need the cranck.

[Rogue]

Parts remaining:

Head $1000 still assembled with valves and springs (never skimmed or overheated)
Crank $300 no spun bearings but may need a polish
Flywheel $75
Intake plenum w/ air horns $125
Injectors $60
Stock cam Shafts $150
Coolant rail (large) $45
Connecting Rods $250
Dinan Chip $100

E30 M3 steering rack- good condition, 76k miles, with tie rods. $175

Pics so far are up here... Taking offers on the trunk also.

https://picasaweb.google.com/1180786...3EnginePartOut

[Rogue]

PM Sent

[nickn3]

Pm sent on cam tray with caps.

[Rogue]

PM sent.. valve cover was sold last night.

[nickn3]

I will also take the upper, lower oil pans and the oil filter housing. Thanks.

[Rogue]

Parts remaining:

Head $1000 still assembled with valves and springs (never skimmed or overheated)
Crank $300 no spun bearings but may need a polish
Cam tray with matching caps $300
Upper oil pan $125
Lower oil pan $100
Flywheel $75
Intake plenum w/ air horns $125
Injectors $60
Stock cam Shafts $150
Oil filter housing $75
Coolant rail (large) $45
Connecting Rods $250
Dinan Chip $100


E30 M3 steering rack- good condition, 76k miles, with tie rods. $175

Steering rack and plenum pending sale..

[nickn3]

I will take the valve cover.

[blyguy]

I will take the other wiring harness. Paypal is ready. Thanks

Bryant

[Rogue]

Thanks Euro....

Parts remaining:

Head $1000 still assembled with valves and springs (never skimmed or overheated)
Crank $300 no spun bearings but may need a polish
Cam tray with matching caps $300
Upper oil pan $125
Lower oil pan $100
Flywheel $75
Intake plenum w/ air horns $125
Valve cover $125
Injectors $60
Stock cam Shafts $150
Oil filter housing $75
Coolant rail (large) $45
Connecting Rods $250
Engine Wire Harness (x 1) $150 each
Dinan Chip $100


E30 M3 steering rack- good condition, 76k miles, with tie rods. $175

I also have a trunk with some of the edges damaged.