FS update: parting 88 M3

[Bruce]

Well first round of parts are in the process of going out. Still have more parts to sell.

Buyer pays all shipping from 75034 (Dallas). I will be at the July DE at Barber so delivery can be arranged.

If not specifically listed email me. Car was not running when I bought it so I am not sure of the condition of come parts- on the parts I can verify I will before shipping.

I am taking this thing down to the bare shell. I am keeping: brake booster, master cylinder, brake lines, dashboard (everything under the dash is for available), steering column, stru housings and spindles, power steering and steering rack. I can't think of anything else I am keeping.

Prices were compared to used parts on Turner's website.

Block, crank, crank pulley, upper oil pan, bell housing- **SOLD**
ENTIRE wriring harness for the car **SOLD**
Head- **SOLD**
cam tower with keepers- **SOLD**
AFM- **SOLD**
Cam buckets (without shims)- **SOLD**
cam tower back cover- **SOLD**
ECU without chip- **SOLD**
Dinan Gen 4 chip for 2.3- **SOLD**


Prices listed are my estimates. If it is out of line make me an offer.
Front fenders- $100/each
Stock cams- make offer
Throttle bodies- $200
stock flywheel- $100
valve cover- $100
Plenum (with trumpets)- $150
stock 2.3 injectors $100- can send them to rebuilder for extra $50 before being shipped to you
exhaust header- $100 ($250 on Turner)
oil filter housing $75
airbox- in good condition...trash unless somebody wants it- free, you pay for shipping
alternator- $100 ($299 on Turner)
cam sprockets- $30 each
PS pump- $100
lower oil pan (no baffle) $100
oil pump- $50
starter- $75
exhaust coolant tube- $40 ($75 on Turner)
distributor housing- $50 ($89 on Turner)
intake cam sprocket cover- $25
PS bracker- $25
head bolts- $40
distributor rotor adapter- $25
water pump pulley- $20
upper alternator bracket- $20
pivoting alternator bracket- $20
intake elbow- $15
engine mounts- $50 both
tan interior bits- make offer



Bruce
89 M3 2.5
88 M3 (project)
95 M3

[Bavarian3]

Bruce,

Do you have the front bumper mounting covers? LTM.

[Bruce]

Originally posted by Bavarian3
Bruce,

Do you have the front bumper mounting covers? LTM.

Since I am keeping the car I will probably reuse the bumper covers.

[Aforange14]

Ill take that airbox, the top half at least. Im planning on chopping mine up to custom fit a MAF, so an extra might be helpful. Ill email ya

[jakeb]

passenger side fog lamp?

jake

jake AT theguestroom DOT net

[vlksdragon]

Color and condition of the front fenders?

thanks....

[graphik]

what month was the car manufactured? i need the early style passenger window motor.

alex

[Bruce]

Originally posted by vlksdragon
Color and condition of the front fenders?

thanks....

Driver is good (DOT R- not sure how old)- one small dent.

Passenger is fair (original). Slight bend and surface rust at attachment point under rocker panel, paint drip near A pillar, dent on upper surface of fender flare, dent and clear film on leading edge.

Driver needs slight work, passenger needs more but is salvagable. I am selling to go to fiberglass or CF E3 fenders.

[Bruce]

Originally posted by graphik
what month was the car manufactured? i need the early style passenger window motor.

alex

As of now I am going to keep the motors. I may sell them down the road.

Did you get my PM for the A/C?

[graphik]

i picked up a motor at a junkyard today. yeah i got your pm, im about to reply. thanks!

alex

[kenny]

PM sent regarding valve cover

[Bruce]

Got your PM...but it is sold. Sorry.

Bruce

[kenny]

Bummer. Thanks for the quick reply.

[ADA///M]

is the airbox top and bottom? Either way...ill take it. email me @ [email protected]

[Bruce]

Airbox is gone. I'll update my list tonight.