Reintroducing Massive's 300x32mm Rally BBK for 15" rims

[Genius]

Reviving this thread to gauge interest in this AP caliper based kit. Some of you expressed interest in this kit in the other group buy thread(willwood kit).
Lee needs 10 people to sign up in order to get it produced. I’m hoping we get enough interested to get this done.
So if you prefer AP caliper kit over the wilwood please contact Lee Directly or feel free to pm me.

[LeeVuong]

I would be ready to produce ONLY 5 sets of these AP Racing-specific radial mounts if I can get 5 firm orders by Friday May 22nd. Then it will have to be at least 10 sets. I am trying to make it happen now by piggy backing productions.
Thanks
Lee

[LeeVuong]

Hi everybody
5 sets of Radial mounts for AP Racing CP8350 have been produced on top of 20 sets for Wilwood calipers. Hats are already machined and anodized. Radial mounts have been machined and are currently being anodized. Shipping shall start this Thursday. I shall email all related info -- part numbers for rotors and calipers as well as payment infos -- this Saturday afternoon.

Because of the very small number of radial mounts for AP Racing CP8350 calipers, there will be a 100$cad premium on that option.

Thanks all

Lee

[LeeVuong]

Test fitting before anodization. Compatible with 4 and 6 pistons radial Superlite calipers.

[LeeVuong]

Hi everyone

All emails were sent by Saturday afternoon. If you are still waiting for yours, it is probably in your Spam Box as I have received no notification of incorrect email address. When I didn't have specific email addresses, then I used the PayPal addy.
In any case, if you want me to resend the email, please contact me at [email protected]

Thanks

Lee

[LeeVuong]

I have received all payments but one.
Also, I have started shipping.
Thanks everyone.

[LeeVuong]

All the front kits have shipped. For Wilwood and AP Racing calipers.
I have sent tracking numbers.
When installing the studs on the radial mounts, please use Red Loctite (or equivalent).
I have included a pair of jam nuts that you can use to easily insert and lightly torque the studs. You know how that works (use two wrneches). There's is also absolutely no point to torque them like crazy.

The calipers are offset with the rotor by a small 0.5mm when using totally flat discs. If using rotors with a small 0.5mm step at the mounting flange, the the rotor and calipers will be 100% centered.
That 0.5mm offset is totally negligeable ;-)

if you have any question, then don't hesitate.

Also, on this GB, there was a lot of free stuff included
- Free stud kits
- Free wheel spacers
- Free shipping

I hope you'll be happy ;-)

Lee

[mwagner10702]

if you have any question, then don't hesitate.

OK - I'll bite. These studs you mentioned. I am not following. The only radial mount or caliper fasteners I see are shown in the pictures below. Can you clarify if these studs replace either of the bolts in these pictures?

[LeeVuong]