Announcement

Collapse
No announcement yet.

Reintroducing Massive's 300x32mm Rally BBK for 15" rims

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • LeeVuong
    replied

    Leave a comment:


  • mwagner10702
    replied
    Originally posted by LeeVuong View Post
    if you have any question, then don't hesitate.
    OK - I'll bite. These studs you mentioned. I am not following. The only radial mount or caliper fasteners I see are shown in the pictures below. Can you clarify if these studs replace either of the bolts in these pictures?



    Leave a comment:


  • LeeVuong
    replied
    All the front kits have shipped. For Wilwood and AP Racing calipers.
    I have sent tracking numbers.
    When installing the studs on the radial mounts, please use Red Loctite (or equivalent).
    I have included a pair of jam nuts that you can use to easily insert and lightly torque the studs. You know how that works (use two wrneches). There's is also absolutely no point to torque them like crazy.

    The calipers are offset with the rotor by a small 0.5mm when using totally flat discs. If using rotors with a small 0.5mm step at the mounting flange, the the rotor and calipers will be 100% centered.
    That 0.5mm offset is totally negligeable ;-)

    if you have any question, then don't hesitate.

    Also, on this GB, there was a lot of free stuff included
    - Free stud kits
    - Free wheel spacers
    - Free shipping

    I hope you'll be happy ;-)

    Lee

    Leave a comment:


  • LeeVuong
    replied
    I have received all payments but one.
    Also, I have started shipping.
    Thanks everyone.

    Leave a comment:


  • LeeVuong
    replied
    Hi everyone

    All emails were sent by Saturday afternoon. If you are still waiting for yours, it is probably in your Spam Box as I have received no notification of incorrect email address. When I didn't have specific email addresses, then I used the PayPal addy.
    In any case, if you want me to resend the email, please contact me at [email protected]

    Thanks

    Lee

    Leave a comment:


  • LeeVuong
    replied
    Test fitting before anodization. Compatible with 4 and 6 pistons radial Superlite calipers.

    Click image for larger version

Name:	104938037_2802860853156022_4241248768289582736_n.jpg?_nc_cat=100&_nc_sid=110474&_nc_oc=AQmpqgwFBVjYxNg98fL4hFGvnPO1OgjOe8ZNobIL2VF6-5sFkVMP9Jlw8qpNMn-BTuGp0RXsez2je9XWR2BNMEWH&_nc_ht=scontent-yyz1-1.xx&oh=ba8763c8766bf67e4c25c131e5c207fd&a
Views:	99
Size:	88.0 KB
ID:	1290615

    Click image for larger version

Name:	105489801_2802861053156002_1148471049190362383_n.jpg?_nc_cat=107&_nc_sid=110474&_nc_oc=AQmZQGpztN1WRahB_-ykPiadWg-PL-BC517V0VnLIWkytgUe73Ea5v7yVTVMCTk5G2FVrIhIjktO3Cgc-eVA12N6&_nc_ht=scontent-yyz1-1.xx&oh=e8ccdec36d2730aed0116945c2bf8b76&a
Views:	84
Size:	90.0 KB
ID:	1290616

    Leave a comment:


  • LeeVuong
    replied
    Hi everybody
    5 sets of Radial mounts for AP Racing CP8350 have been produced on top of 20 sets for Wilwood calipers. Hats are already machined and anodized. Radial mounts have been machined and are currently being anodized. Shipping shall start this Thursday. I shall email all related info -- part numbers for rotors and calipers as well as payment infos -- this Saturday afternoon.

    Because of the very small number of radial mounts for AP Racing CP8350 calipers, there will be a 100$cad premium on that option.

    Thanks all

    Lee

    Leave a comment:


  • LeeVuong
    replied
    I would be ready to produce ONLY 5 sets of these AP Racing-specific radial mounts if I can get 5 firm orders by Friday May 22nd. Then it will have to be at least 10 sets. I am trying to make it happen now by piggy backing productions.
    Thanks
    Lee

    Leave a comment:


  • Genius
    replied
    Reviving this thread to gauge interest in this AP caliper based kit. Some of you expressed interest in this kit in the other group buy thread(willwood kit).
    Lee needs 10 people to sign up in order to get it produced. I’m hoping we get enough interested to get this done.
    So if you prefer AP caliper kit over the wilwood please contact Lee Directly or feel free to pm me.

    Leave a comment:


  • bradleydelliott
    replied
    An alternative to using 15" rims
    E30M3 Link GroupBuy

    Leave a comment:


  • mwagner10702
    replied
    Well, I'd be in for an E30 M3 Rally kit with the AP Racing CP8350 caliper if it helps gets you closer to your 15 minimum needed to produce.

    Leave a comment:


  • bradleydelliott
    replied
    Still interested... though I am leaning toward the 17" rims, more tire options... not many 16x8 rims out there. :(
    Brad

    Leave a comment:


  • LeeVuong
    replied
    Originally posted by Crank View Post
    How many interested parties did you have, so far?
    I would say as many as there are fingers in a hand. ;-)

    Leave a comment:


  • Crank
    replied
    How many interested parties did you have, so far?

    Leave a comment:


  • LeeVuong
    replied
    Originally posted by 99M3Riverside View Post
    I was curious if you had any update on this. Thanks
    Hi.

    15 orders are required to warrant a production. Sadly, it seems that not enough people are interested. And I don't want to stock pile a production on the shelves as this is money sleeping for a product that is a niche in a niche in a niche....

    Lee

    Leave a comment:

Working...
X