1989 e30 m3 aw

[ADA///M]

Engine running in

VID_19971126_111213_985 by Jan Podržaj, on Flickr

After run in proper oil was filled

IMG_20220921_113048_576 by Jan Podržaj, on Flickr

great stuff...reminds me of my 2020 days redoing everything except the full engine rebuild. I stopped just below the cam box lol

Any chance you have some more full car shots with the e2/e3 front splitter? I'm about to do the same.

[J4JO]

That's looking awesome!

If you want to clean up the the connection to the coolant level sender, the plug housing is part # 61131378408 and two the pins are # 61130007441
It's the same housing that goes to the washer level sender and brake fluid level.

Thanks. Already have the housing but did not find the pins. Have to sort all kinds of fragile connectors.

[J4JO]

great stuff...reminds me of my 2020 days redoing everything except the full engine rebuild. I stopped just below the cam box lol

Any chance you have some more full car shots with the e2/e3 front splitter? I'm about to do the same.

Just yesterday I had the car delivered to my home. Attached are some photos of the front E2/E3 combo splitter. Will look much better when lowered and paired with 17" wheels but that is my taste.


20220927_184110 by Jan Podržaj, on Flickr

20220927_182244 by Jan Podržaj, on Flickr

20220927_182915 by Jan Podržaj, on Flickr

[ADA///M]

Just yesterday I had the car delivered to my home. Attached are some photos of the front E2/E3 combo splitter. Will look much better when lowered and paired with 17" wheels but that is my taste.


20220927_184110 by Jan Podržaj, on Flickr

20220927_182244 by Jan Podržaj, on Flickr

20220927_182915 by Jan Podržaj, on Flickr

Thanks! how do you like the combo?

[J4JO]

Thanks! how do you like the combo?

On stock height it looks too "pointy". But lowered it will be superb. Only thing is, due to lip sticking out, it is troubling to load a car on a trailer without scraping the floor.

[J4JO]

Wheel testing. I put them together perfectly based on my calculations. No spacers will be needed and they are not sticking out. Only would have problems with (strut/nut) clearance if coilovers would be installed.

20221105_170500 by Jan Podržaj, on Flickr
20221105_170134 by Jan Podržaj, on Flickr
20221105_165812 by Jan Podržaj, on Flickr

[mattbeloed]

Nice car