Announcement

Collapse

Session time has been extended...

Instead of 30 minutes, you will be logged into s14.net for 1.5 hours of inactivity before being logged-out. Also instead of having only 30 minutes to edit a post, it has now been extended to 60 minutes.
See more
See less

Dead pedal install

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dead pedal install

    Hi,

    Found this THREAD through 'searchie' but I am still not sure how to remove the speaker panel under which the dead pedal should be mounted. :lostme:

    Thnx, Chris

  • #2
    Not a problem. First remove the phillips screw on the panel. Then remove the undercover on the drivers side, underneath the steering column. You will then see 2 10mm (?) bolts going thru the hood release bracket and into the top of the speaker cover. Remove those two bolts, the pull the door lining up and remove the panel. Be careful not to break the bottom part. OK, once the panel is out, turn it over. On the back you should see a diagonal line impression in the plastic. You need to cut along this line in order to fit the factory M dead pedal on right. If you don't cut it it will be hard to align all of the screw holes when you put everything back together and things will be off. The other end of the pedal mounts where the clutch pedal stop is.

    88 M3 - LACHSSILBER/M TECH
    89 M3 - ALPINEWEISS II/SCHWARZ
    85 323I S52 - ALPINEWEISS/SCHWARZ
    91 M TECHNIC TURBO - MACAOBLAU/M TECH


    Comment


    • #3
      Thanx !

      Anybody has the PN for the longer clutch stop.

      After installing the EVO3 dead pedal the 'original' clutch stop

      is not long enough to mount it firmly :S (and being a plastic screw

      does NOT help either)

      Thnx, Chris

      Comment


      • #4
        Good time to install an adjustable clutch pedal stop like the one UUC has or you can make your own.

        88 M3 - LACHSSILBER/M TECH
        89 M3 - ALPINEWEISS II/SCHWARZ
        85 323I S52 - ALPINEWEISS/SCHWARZ
        91 M TECHNIC TURBO - MACAOBLAU/M TECH


        Comment

        Working...
        X