Announcement

Collapse
No announcement yet.

Repairing Wring for Coolant Temperature Sensors

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Repairing Wring for Coolant Temperature Sensors

    Anyone done this?

    Mine is super brittle and has vibrated itself off of the connectors at the thermostat.

    Tips appreciated!

  • #2
    Hi,

    the cables came loose from the connectors themselves? Then I would pin out the connectors from the connector housing, buy new connectors, crimp them on the cables, then put the connectors back in the housing. I would recommend to crimp new ones on and not to solder something there since the engine vibration may damage the solders. Regards, Nils

    Comment

    Working...
    X