Announcement

Collapse
No announcement yet.

Repairing Wring for Coolant Temperature Sensors

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • weisen
    replied
    Hi,

    the cables came loose from the connectors themselves? Then I would pin out the connectors from the connector housing, buy new connectors, crimp them on the cables, then put the connectors back in the housing. I would recommend to crimp new ones on and not to solder something there since the engine vibration may damage the solders. Regards, Nils

    Leave a comment:


  • Crank
    started a topic Repairing Wring for Coolant Temperature Sensors

    Repairing Wring for Coolant Temperature Sensors

    Anyone done this?

    Mine is super brittle and has vibrated itself off of the connectors at the thermostat.

    Tips appreciated!
Working...
X