If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
i was backing out of the driveway this morning and clipped the curb which pulled the passenger side bumper cover off. ive been trying to put it back on but i cant get it back into place. any suggestions??
1. Use a thin screwdriver to pry off the two caps on the front bumper.
2. Place a cloth under the bumper so you don't scratch the bumper
cover
3. pull the cover straight off, but make sure all the connectors are
still in place.
4. take a pair of pliers and adjust the brackets which hold the
cover, the bracket should be "square" 90 degree angles on top and
bottom.
Comment