Announcement

Collapse
No announcement yet.

Need some comfirmation here

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • hayesMpower
    replied
    Originally posted by EN88M3 View Post
    I think the male tabs on the back of the badge are meant to be bent into place around the back of the grille to hold the badge in place. I also bought the badge and wondered the same thing.
    Cool ... thanks very much ... I thought the tabs were plastic; I did not realize they're bendable metal.

    I tried to bend the tabs while inserted into the grille, but my fingers were too thick to do so.

    So I bent them down at 45 degrees just to get it started and went to insert it ... viola!!! This is perfect as it seems to create a pressure fit into the grille just in doing that.

    Thanks again.

    Mr. Hayes
    Last edited by hayesMpower; 03-07-2009, 11:38 AM.

    Leave a comment:


  • EN88M3
    replied
    I think the male tabs on the back of the badge are meant to be bent into place around the back of the grille to hold the badge in place. I also bought the badge and wondered the same thing.

    Leave a comment:


  • hayesMpower
    replied
    Originally posted by diegom6 View Post
    Hello guys,

    I would like to know if the following part numbers are the corrects I need for the M3:

    Front ///M3 badge insert grille

    Letter "m3" front 51 14 1 934 620

    Rear ///M 3 badge trunk (Looks like I need to order these seaprate?)

    Letter "m" rear 51 14 1 917 739
    &
    Emblem adhered rear 51 14 1 934 619

    BMW hood & trunk symbols/badges

    Plaque 51 14 8 132 375


    In the other hand I'm trying to get the labels that goes under hood and I took note from the ones that still exist but are very old and trashed:

    2 121 483 = BMW Diamandschwarz - metallic

    2 121 500 = BMW Original Teile (in different languages) left shock tower

    1 363 259 = Achtung (the coil dirver and some little description)

    Where can I get these, besides the dealer? Still some company makes these three last codes?

    Lastly, seems I can't find either the part number or diagram (figure) of the plastic cover that goes under the front bumper, more precisley between under front bumper and oil pan....it's like a "skidplate" of plastic to hold some stuff maybe or just add dynamics I guess.



    Thanks
    OK, apologies in advance for what will be most likely "stupidest question of the year" winner here ... :chaired::chaired::chaired:

    I've ordered the front ///M3 badge insert grille [Letter "m3" front 51 14 1 934 620] as per above, but it seems that this piece part is only the male end ... there's no female part behind the grille to lock the emblem into to secure it onto the grille.

    It does not seem to be a snap fit into the grille all by itself.

    Is there a part missing that goes behind the grille and, if so, what is that PN, please?

    There was no emblem there when I purchased the car a year ago ... I'm only getting around to buying one now ... busy with other things on the car quite honestly.

    Thanks in advance.

    Mr. Hayes

    Leave a comment:


  • diegom6
    replied
    Some more little help here, I figured out pretty much the whole parts I need (PN).

    The following PN: 51-48-1-906-393 respond to the "asbestos" heat shield material that goes sin the firewall?

    Mine it's cracked and need replacement? Where can I source a new one besides the dealer in case they don't have it (quoting to them right now).

    Thanks

    Leave a comment:


  • diegom6
    replied
    thank you!

    Leave a comment:


  • Toast
    replied
    It's part # 51711961894. Item 10 as seen here:

    http://www.bmwmobiletradition-online...34&hg=51&fg=70

    Leave a comment:


  • diegom6
    replied
    Thanks Collin,

    I figuredout the sticker-labels. Yet can't fidn the part number ofthe splash guards.

    Leave a comment:


  • ColinM
    replied
    There's already a decent thread about the stickers. Search for "stickers under hood" or use similar words.

    FYI--The plastic pan that you refer to is sometimes called a "splash guard"

    Cheers,
    Colin

    Leave a comment:


  • diegom6
    started a topic Need some comfirmation here

    Need some comfirmation here

    Hello guys,

    I would like to know if the following part numbers are the corrects I need for the M3:

    Front ///M3 badge insert grille

    Letter "m3" front 51 14 1 934 620

    Rear ///M 3 badge trunk (Looks like I need to order these seaprate?)

    Letter "m" rear 51 14 1 917 739
    &
    Emblem adhered rear 51 14 1 934 619

    BMW hood & trunk symbols/badges

    Plaque 51 14 8 132 375


    In the other hand I'm trying to get the labels that goes under hood and I took note from the ones that still exist but are very old and trashed:

    2 121 483 = BMW Diamandschwarz - metallic

    2 121 500 = BMW Original Teile (in different languages) left shock tower

    1 363 259 = Achtung (the coil dirver and some little description)

    Where can I get these, besides the dealer? Still some company makes these three last codes?

    Lastly, seems I can't find either the part number or diagram (figure) of the plastic cover that goes under the front bumper, more precisley between under front bumper and oil pan....it's like a "skidplate" of plastic to hold some stuff maybe or just add dynamics I guess.



    Thanks
    Last edited by diegom6; 11-19-2008, 08:22 AM.
Working...
X