Tweet
I have red that people use a 25mm Audi master cylinder on S50 swaps to get better space. I have asked a couple of guys that have done this, but no one have a part number for me. So I took a shot and bought a new one from Ebay for a Audi 80 I think.
It was 23.8mm.
But what happened was that the rod inside the brake booster did bottom the master cylinder way before it was screwed on. So result was that when the master cylinder was bolted up it was already bottomed like you would have the pedal at the floor.
Anyone that can help here on this subject?
It was 23.8mm.
But what happened was that the rod inside the brake booster did bottom the master cylinder way before it was screwed on. So result was that when the master cylinder was bolted up it was already bottomed like you would have the pedal at the floor.
Anyone that can help here on this subject?
And on the S14 I had Volvo distributor cap!
Comment