Announcement

Collapse
No announcement yet.

Big camber problem to solve

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by evo mmm View Post
    my sub was bent upward slightly throwing off my suspension numbers from what some gurus had told me is they can tweek from metal fatigue or a severe impact and it was very common my was off 6mm
    Mike
    The thing is i donīt recall any severe impact, but as my shocks were wasted maybe that caused some issues on subframe as the suspension was copressed to much and to fast it might have send some forces to the subframe.

    Originally posted by LeeVuong View Post
    Could also be a subframe bushing gaving sagged on one side.
    Subframe bushing are those blue poli something and by visual inspection they look fine, but thinking about it, as they are more rigid it is harder to show any play or wear, i think
    Last edited by boris450; 07-07-2013, 04:59 AM.

    Comment


    • #17
      Today i lowered subframe and bushing looks good except sitting position,they look to be off.
      Whatīs your thougts on this and can someone identify them?
      Right

      Left
      Last edited by boris450; 07-07-2013, 05:27 PM.

      Comment


      • #18
        In the second picture, is that a crack on the left hand side of the subframe?

        Thomas
        sigpic

        Comment


        • #19
          bumping old thread......was the cause of the rear camber problem ever identified?
          Marshall
          75 M2
          88 M3

          Comment

          Working...
          X