Announcement

Collapse
No announcement yet.

Headers

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Headers

    My header is cracked. In need new headers. Where can I get them and is anyone from here selling them.

  • #2
    You can have the header welded very inexpensively.

    If you need a header after all, I have several used ones.

    Stan

    Comment


    • #3
      They told me it cannot be welded.

      Comment


      • #4
        >>>They told me it cannot be welded.<<<

        That must be some header crack! My car had a crack down near the header exit, I was able to weld it with my MIG right on the car. That was 3 years ago. If you can post a PIC I'd be happy to give you my opinion. Or try another shop for a second opinion.

        Stan

        Comment


        • #5
          how much for a used one?

          Comment


          • #6
            I have a few myself if Stan cannot accommodate you.

            88 M3 - LACHSSILBER/M TECH
            89 M3 - ALPINEWEISS II/SCHWARZ
            85 323I S52 - ALPINEWEISS/SCHWARZ
            91 M TECHNIC TURBO - MACAOBLAU/M TECH


            Comment


            • #7
              >>>I have a few myself if Stan cannot accommodate you.<<<

              ??? Didn't I just say that I could accommodate the guy? Sheesh.

              I've seen headers sell for around $100 and am in CT area code 06877. Add on shipping to you for about 15 pounds to get a grand total price. Let me know! I'd still suggest an on-the-car weld if possible. Make sure they pull the O2 sensor and take other precautions. Header swap labor is high as it's quite the PITA, so keep that in mind. If you do decide to swap headers, do yourself a favor and use this hardware.. Stock header studs are prone to loosening and breaking off, especially after 15 years on the front lines.

              Stan
              Last edited by Stan; 04-02-2003, 11:56 PM.

              Comment

              Working...
              X