S14 2.6

[autox320]

http://www.e30m3performance.com/now_showing/gallery/kk/index.htm

Where is the front swaybar? If it's deleted, I wonder what spring rates he is running.

Very hot car.

[Evo2Trela]

In a sequential box you only need the cluch to start the car . so there is no need for heel-toe.

[Gsan]

Any word yet on crank and conrod pricing markus:idea:

[trent]

Re: S14 2.6

Originally posted by Gsan Does any one know where this 91mm crank comes from? [/B]

A competent machine shop can offset grind a 2.5L crank which would make the rod journals smaller meaning custom rods/pistons. I am sure you guys are building these big motors with custom long rods/pistons anyway to overcome extreme rod ratios.

Another good plus is a smaller rod journal means less friction and more power! Mechanical advantage rules.

[Digitalwave]

Originally posted by H a n
are those the clutch and brake pedals? if so, how do you heel-toe?

or are they the brake and gas? if so, why are they both on the left side of the steering column?

I don't think you have to heel-toe with a sequential gearbox.

[H a n]

are those the clutch and brake pedals? if so, how do you heel-toe?

or are they the brake and gas? if so, why are they both on the left side of the steering column?

[Gsan]

the calculation the dutch add is incorrect B X S=93.4 X 91> 2494 cc[done]
95 X 91> 2580 cc

Great car Sven

[Markus]

my friend Sven ownes a 2.9l with 420hp

Green Beast

he said it is a complete different driving as driving with his other 360hp 2.5 DTM car...

runs like the hell he said

Markus

[Gsan]

Thanx Markus, Ill check this dutch shop also which parts they renewed.
Anyone any experience driving this kind of long strokers (>2.5):rolleyes:

[Markus]

sorry i don't know prices but i could ask next week.........

Markus

[Gsan]

Do you know anything about pricing Markus, for a crank and rods.
Are pistons needed?

[Markus]

here in germany you could get cranks for
2,6
2,7
2,8
2,9

S14 engines.........
but it is a secret who builds them.......

Markus

[Gsan]

They do a conversion for 4000E thats for an exchange 2.6 engine incl fitting.
Further incl.
-48mm THB
-bigger exh. manifold

The advertisement is on a auction site.

auction

Ive heard somewhere that these cranks were done in Sweden

[Bavarian3]

Custom machined E34 M5 crank?

[///M-fart]

?
The last pic is a 6 pack ?!