It took alot of work, but the last set of group N mounts I was able to machine about 10MM off the top and made an extention cup for the bottom. Seems to work well, but was alot of work.
I...
Yahweh
Registered
Joined: 11-12-2007
Location: 325
-
You want to match your diff bushing with subframe bushing material. The Z3M matches stock bushings or Group N bushings well, alot of people still use the IX mount even though its offset..
...Leave a comment:
-
Solid spark on all 4?
Each injector getting pulse width?Leave a comment:
-
Take a look at roll over valves / discrimatator valves, then run the vent to the exterior of the car.
Needs to be properly sized as if its too small its get stuck in the closed postion from...Leave a comment:
-
The ix bushing is offset, which only really helps if your flipping raising your subframe from stock location.
Looks like the 802 bushing is solid rubber and the 244 bushing has more airgaps...Leave a comment:
No activity results to display
Leave a comment: