Announcement
Collapse
No announcement yet.
Search Result
Collapse
362 results in 0.0321 seconds.
Keywords
Members
Tags
-
Welcome. Great group of knowledgeable people on this site. In Mass.
-
-
I’m going to strip it all out and start from scratch. I’ve been talking to Daniel Stern Lighting about replacing the cheapo GE sealed beam lights that came with the car. A friend of mine recently...
Leave a comment:
-
I put the fuse box back together and connected the battery. Car started up fine. As soon as I turned the low beams on and off (with the fogs off) the low beams stayed on. Also noticed I have one fog...
Leave a comment:
-
I’ll put it back together tonight and see if I can replicate again. High beams are not in play. I do think the issue may be triggered when I turn the fogs on.
I also have a few more...
Leave a comment:
-
I’ll try next time the lights stay on. Today I removed the fuses / relays and gently lifted the fuse box up. Hard to see under there but everything is very clean. No burns, cut wires, rub throughs...
Leave a comment:
-
Headlights staying on
i’ve been having periodic issues with my headlights staying on with the headlight switch in the off position and the car completely turned off. I replaced the headlight switch and then narrowed...
-
Thanks guys. I’ll get an BMW in-tank and a filter. Already have a new external Bosch pump on the parts shelf. I’ll also do the tank hoses while I am in there. Hopefully no surprises when...
Leave a comment:
-
Bogging
For the first time last week, the car would not start. Had to crank it about eight times before she turned over. Ran fine until I took an on-ramp in third gear at around 4500 RPMs, Just after coming...
-
Poron is excellent material. I’ve used it in both outdoor and automotive speaker designs. It will last and work properly as long as the material is not compressed more than 50% of its thickness....
Leave a comment:
-
Radiator bushing
I want to replace the rubber grommet located within the top radiator mount. Real OEM calls out the part as 17111117442. The part I received from two different suppliers is much thicker than the one that...
-
Block info
I have a US spec 2.3 block that I’m planning to build out. The block was decked by PO. What is the minimum deck height, where is the measurement taken from, and what is the max cyl bore to keep...
-
Interested in the pumps. Do you know how old the in-tank pump is?
Leave a comment:
-
This was the chip I found on top of the ECU when I installed a Turner 2.3 chip. There was a Dinan chip in the ECU that I did not like at all. I gave it to a member here....2 Photos
Leave a comment:
Leave a comment: