Thanks for the interest everyone!
28 results in 0.0161 seconds.
-
Car is sold. I got a smoking deal when I bought the car, figured I would pay it forward to the next driver Thanks for the interest everyone!
-
Thanks for the comments and interest guys. A deposit has been received on the car from first party that got in touch a few hours backLeave a comment:
-
I have these rims too for the buyer (no tires). Probably should have kept these wheels on......
Leave a comment:
-
Hey man, thanks for the comment. Located in VA.
Ahh the early 2000's. I should have been buying cars and stocks.
Correction:
It's a 1990.
Couple of other photos....Leave a comment:
-
1991 bmw m3
Buy a driver's M3!!!
Modifications done by previous owner:
Recaro Sport seats, Alcantara Steering, recovered rear seat to match fronts, JB Racing Turner motor Sports flywheel/clutch,... -
Just installed these on my '90. The rims rub the caliper clips up front.They look great and the tires fit just fine but the rim itself is the issue FYI if you are considering this setup. I'm going to...Leave a comment:
-
OK thanks I'm going to try to find contact info on themLeave a comment:
-
More bad news.
Compression was roughly 225, 35, 105, 225 first test, then roughly 225 ,120, 105, 225 second test. So, we likely have bent valve/valve spring issue or worse....
This is supposed...Leave a comment:
-
Couple photo's of the damage after taking a look today.
Going to get a compression test in case there is a bent valve or something......Leave a comment:
-
Ironhead, I agree, from photos of the top end of an S14 it seems physically impossible!?
The engine was running 100% synthetic 10w30 (thought it was 10w40) and was about a quart low the first time...Leave a comment:
-
WTB: Exhaust Cam, Cam housing, timing chain tensioner, etc
Hello,
Need some help to get my S14 back on the road
This is for a 1990 E30 M3.
-Exhaust Cam
-Cylinder head intermediate housing (list price for remanufactured is $1,485)... -
So far the damage seems to be limited to the Cam housing not the lower part of the head. I will double check with the mechanic though.
Great news about the Volvo shims, I'll order those.
...Leave a comment:
-
I know I'm blowing up my own thread, but here is a video of the motor running before the cam failure. This is after 3 hours of highway driving on the way home from TN. I feel like I can hear the tappets...Leave a comment:
-
Todd, my thoughts too. WTF??? I wonder if it "stuck" to the cam lobe and a cold engine allowed just enough extra clearance to knock it out on startup. Here I was hoping to have some nice drives...Leave a comment:
-
OK, head is off. My mechanic says source of the noise is a valve shim broke loose and destroyed one of the exhaust cam lobes. It also caused gauging and damage to the cylinder head housing. He said the...Last edited by pete914; 10-12-2016, 02:08 AM.Leave a comment:
Leave a comment: