You might find that it can be much closer than you think.
"If" the diameter of the hole is 20mm, then the area is 10*10*pi=314.2 mm2.
With a 20mm hole the diameter...
1000 results in 0.7285 seconds.
-
I placed mine under the M6 bolt hole which holds the heater matrix return pipe to the block.Leave a comment:
-
Also available in the UK>
https://www.longstonetyres.co.uk/pir...li-p700-z.html
At £1,282.80 for 4 tyres, I'll pass if that is OK.Leave a comment:
-
Where in the world are you Frank?Leave a comment:
-
I took the liberty to plot the power in to excel to make a torque curve.
All within the margin of error of my eye sight....Leave a comment:
-
Ref the bolded. Yes it does. Tyre losses (the greatest losses from flywheel to road) are directly proportional to road speed. Choose a higher gear on a Dynojet and the measured WHP will be lower. ...Leave a comment:
-
The problem with the question of which are the better bearings is that it is impossible to compare brands under the same test conditions. No one has run two identical (aside from bearings) in identical...Leave a comment:
-
What engine management are you running? Stock Motronic, MAXX, stand alone?
Sounds to me than once the engine is past the the cold start phase, the valve is closing off....Leave a comment:
-
Rich,
Nailed it.
When this was first discussed on Pistonheads.co.uk, there were many who tried to offer advice. Mr Lord was certain they were wrong.
For me, it...Leave a comment:
-
Have another...
https://www.youtube.com/watch?v=p-mUOpbyNlQ
Good to see they have dropped the idea of turbocharging.Leave a comment:
-
I'm with you Bro.
Boils my piss....Leave a comment:
-
Have you tried jumping the relay so the pump is running prior to attempting to start?
If it starts better it will confirm it is the pressure loss causing the slow start.Leave a comment:
-
For UK Sport Evos, POwer windows were an option, as was everything inc power mirrors.
I always thought that would be a cool spec for a Sport Evo. No sunroof, no AC, no power windows, no...Leave a comment:
-
Having had a shell dipped, I can't say I weighed it before and and after. What I did do was add 14kgs/30lb of underseal to replicate the stock finish. Also, the tar sound insulation pads would probably...Leave a comment:
-
BMW Motorsport department used stock head bolts on both GrpA and DTM.
Do you still feel the need for ARP hardware?Leave a comment:
Leave a comment: