1000 results in 0.5620 seconds.
-
Aw crappy. One of the owners must have swapped out the DTM carbon wing I put on there. Does it go flush, or always stick up one level at its lowest? -
Is the flap on the rear wing painted or carbon fibre? Photos look like it’s painted....Leave a comment:
-
Leave a comment:
-
That’s around what my leak down and compression was back just after I bought it. 210-215psi across all and 3-5% leak down, so not much has changed.
Good news. The motor really only has under...Leave a comment:
-
glad to help.
The seat pins are from the e28 M5, and they do puncture the leather, so if you remove them there will be holes....Leave a comment:
-
congratulations on grabbing my old car! It’s heading back to where it came from!
I really loved that car and poured a lot of time and money (don’t tell my wife) into it. It’s...Leave a comment:
-
The hose does, yes, but the elbow is a press fit into the plenum. It comes loose.Leave a comment:
-
Leave a comment:
-
Leave a comment:
-
CongratsLeave a comment:
-
16x8 et11 are bbs rs211. Rs212 are 17x8.5 et13Leave a comment:
-
What Ron said!
thats low.
my stock rebuilt was 200-205 last time I tested a couple years back...Leave a comment:
-
You will have clearance issues with most low offset wheels, and lipped wheels. Most likely you will need a high offset set of wheels and spacers. Apex ARC wheels may clear, but they are not a lipped ...Leave a comment:
-
Leave a comment:
-
Jump the wires at the switch together and see if the lights come on. If they do..........you are in the same boat I was. Search my name and you might find the thread and what the issue was. I
...Leave a comment:
Leave a comment: