Hi Group,
I have 3 50mm header's left from a recent production run.
They are stainless steel, manufactured here in the USA.
50mm pipe diameter from head flange to mid-pipe...
1000 results in 1.3610 seconds.
-
FS: Brand New 50mm Stainless Header
-
I'll post back here once the first set of heads are completed and we've signed off.
At that point, we'll be able to give pricing.
-CL... -
We are currently in the process of completing 5-axis porting profiles for S14, M88, and S38 heads. All done here in the USA.
Samples are in the works presently.
Chris
www.VSR...Leave a comment:
-
FS: Map Light Mirror with integrated V1 Display
Map light mirror with integrated V1 display
V1 display lights up fully, see photo below.
To use this with a V1 radar, you'll need a V1 (obviously) and a hardwire/remote display wire kit from... -
Anything DTM Fiberwerkz is junk.
You'll feel better about lighting the money on fire and toasting a hotdog on a stick than you will with what you get from them....Leave a comment:
-
Why the part out and not selling complete?
Are the engine and chassis matching VIN's?Leave a comment:
-
Evolution 3 Replica Spliiter - 6mm Sintra Plastic - Undrilled
Group,
I have 4x Evolution 3 replica splitters that I had made from a template of my original OEM Evo 3 splitter.
These are 6mm thick, made of pvc plastic. Formal name of the material is "Komatex"... -
Well done, both the restorative work and the awesome road trip with the car!Leave a comment:
-
Were they new?
It's pretty common. Even with the larger diameter shafts as shown in your photo.
Talk to anyone who's swapped in a M60/M62 V8, and they eat half shafts and bearing cages...Leave a comment:
-
Bosch has moved manufacturing all over the place.
If you inspect them closely, you'll find a few issues - The ground electrode, is not parallel to the center electrode. It is also not made with...Leave a comment:
-
Were the X5DC's made in India?
Legitimate question....Leave a comment:
-
Do you have the new head in your hands?...Leave a comment:
-
Great photos, thank you for sharing them!Leave a comment:
-
I'd suggest doing the "package" correctly. You already have the most expensive parts...
Use the 2.5L AFM
Use the correct 2.5L Injectors
Get a proper chip for the 2.5L AFM/Injectors/Stock...Leave a comment:
-
I'd suggest at minimum if converting, to replace the receiver/drier with a new one before charging the system with R134A.
Aside from that, if the system is in a current functioning state the conversion...Leave a comment:
Leave a comment: