91 results in 0.0734 seconds.
-
That's what it is, thank you! -
Mystery connector behind the front bumper?
Had my front bumper off the car, and when I went to reinstall I realized that I have one more connector than I do places to plug stuff in. I reconnected:
- L&R fog lights
- L&R corner marker lights
- L&R
-
Well I'm pleased to say this is "fixed." With fuse 27 pulled I could fiddle with things without losing my mind due to the noise. I can't see the screen on the OBC because (of course) the bulb is burned...Leave a comment:
-
Pulling fuse 27 stops the horn from sounding, as per spdracrm3'd suggestion. Except now I have an other question: If that horn sounding is indicative of a trouble code or a failing OBC, how to I go abo...Leave a comment:
-
It sure sounds like the vehicle horns. The alarm always trips immediately when reconnecting the battery. The siren shuts off as normal with the switch on the key fob, though the horn continues to sound. T...Leave a comment:
-
Horn stuck on, removing relay/fuse doesn't help.
I don't drive the car all that often but this morning I went to take it out for a lazy Sunday drive. It's been parked for maybe a month, with the battery disconnected. When I reconnected the battery... -
It's just me, so I wasn't pumping the brakes while bleeding. I did close the valve and pump the pedal a few times. After that I was able to get one of the rears to bleed, but still nothing from the other....Last edited by Epic2112; 08-30-2014, 06:29 PM.Leave a comment:
-
Pressure bleeding brakes, nothing comes out of the rear bleeders
My M3 has been in storage for about 6 years. During that time it sat unattended, unfortunately, so there are a number of items that need freshening up. Everything seems to work fine, but the brakes... -
I'm not an expert at reading plugs by any means, but they looked good to me. No white residue, they all had a rich brown color to them. Also, they all looked the same, I didn't see any variation that...Leave a comment:
-
Diagnosing smoke, HG? Something else?
If anyone remembers, I posted a few months back that I suspect I have a blown head gasket. (The old thread is here: http://www.s14.net/forums/showthread.php?t=32634). The summer has been busier than... -
Yep, it's a 2.3, sorry I forgot to mention that.
Thanks guys.Leave a comment:
-
Quick Question: Crank Bolt Size?
Anyone know what the size of the crank bolt is off the top of your head? I don't need thread pitch or anything, I just need to know which socket I need for it.
Thanks! -
I have only run the motor a few times. The car is still on jackstands (I am trying to accumulate the money to fix this). I don't remember how it smelled, or even if I smelled it, but it looks white...Leave a comment:
-
Thanks for the suggestions everyone! Hopefully I'll get this underway sooner rather than later.
...
- - - - - - - - - - - - - - - - - - - - - - - - - AUTOMERGED! There's no thread "bumping"Leave a comment:
-
The reason I suspect the oil was the culprit is because it will not compress. If there is more than just a film in there it can cause problems. It is the same reasons that engines can hydrolock and...Last edited by Epic2112; 05-25-2008, 09:16 AM.Leave a comment:
Leave a comment: