311 results in 0.2246 seconds.
-
Seat disassembly
So all of the searches I did bring up links to great write ups on taking the seats apart but everyone I click on is an old dead link. My drivers seat back has the smallest amount of play in and rocks... -
Is that gold color of the calipers and bolt heads the factory look. I think all of my stuff is currently black? -
Rebuilding rear end
OK, I'm going to start getting parts together to rebuild the rear end. I don't race or track this car and its just a nice original car that hardly ever gets driven. I think stock oem rubber bushing and... -
OK, I'm going to start getting parts together to rebuild the rear end. I don't race or track this car and its just a nice original car that hardly ever gets driven. I think stock oem rubber bushing and...Leave a comment:
-
I think I'm going to replace all of the bushings and both rear wheel bearings this fall. Last time I did an e30 rear bearing I found it easiest to just remove the whole control arm and press the bearing...Leave a comment:
-
When I depress the clutch it changes slightly but that’s because I’m no longer under load it’s pretty much the same though. I have had what sounds like a bad passenger wheel bearing forever but every...Leave a comment:
-
Jesus, I can’t believe I didn’t think of that, I’ll give it a shot later today. What’s weird is it’s exactly at 80 and it’s every single time notnjudt some of the time....Leave a comment:
-
Humming or resonance sound
So my car definitely doesn't get driven enough and now I notice once I hit 80 I get a low pitch whine or hum or resonance sound when under throttle. It changes pitch when I let off the gas but doesn't... -
I guess I thought there were a few more hoses then that and remembered a couple really weird shaped ones when I helped a friend remove his motor a long time ago, but I guess I was mistaken. Thanks for...Leave a comment:
-
Wanting to replace all of my hoses
Anyone by chance have a list of all the replacement hoses and sources by any chance? My car has barely been driven more then 500 miles a year for the last decade and I would bet a fair amount of the... -
What does the crank sensor failing have to do with the fuel pump not getting power while cranking. I found out from my own experience that the pump only received power while cranking not with the key...Leave a comment:
-
It sounds like you haven't verified whether you have spark or not. That would be the easiest Thing to verify first.Leave a comment:
-
I'm assuming the fuel comes from the pump and attaches to the backside of the fuel rail and this would be where I want to install a gauge to check the pressure correct? Also which line is the feed line...Leave a comment:
-
If it's stuck injectors then once I start it up and run it I should be able to let it sit around for a few days and then start it right back up right? It probably wouldn't be a bad idea to remove the...Leave a comment:
-
So I finally had a little time today to take the pump out of the tank and it appears to be working fine. One thing I found unusual was that there is apparently only voltage supplied to the tank pump when...Leave a comment:
Leave a comment: